Double Glazing Locks Repair
If a double-glazed window won't close it creates draughts and allows heat to escape. This can also compromise the security of your home and puts you at greater risk of being a victim of burglary.
Double glazed window seals, hinges, and handles can break down over time. If this is the situation it could affect the performance of your windows and invalidate any warranties you may have.
Faulty Locks
Many people install anti-burglar devices on their main doors and gates, but they often forget that windows are prime targets for burglars. Faulty locks can cause drafts, let heat escape, and reduce the security of your home.
If you notice that your uPVC window locks aren't functioning, there is an excellent chance that the mechanism for locking is jammed. This usually occurs due to a slit in the gearbox component. This could cause the handle to not open, but to rotate 360 degrees. This is a problem that is common with uPVC windows, however it is also a problem in tilt-and-turn windows as well as sliding sash windows.
When this happens it is possible to unlock the lock by applying pressure to the lever handle. This will allow you to open the gear box and restore the window's opening. If this doesn't work then you might need to replace the entire mechanism for locking windows.
Most modern uPVC windows use espagnolette locks. They are an internal locking system that secures the window utilising mushroom-like locking cams which are inserted into frame keeps. The handle turns on the gearbox, which then activates the cams for either upward or down movement. A common issue is when the spindle on the lock has been damaged, causing the handle to rotate freely, but not to move the window open or close.
A malfunctioning transmission may cause your window to appear locked, but it is not. double glazing repair could happen when the rods that are the center, also known as crocodile tooth fixings, in the gearbox are snapped off. Misty Glaze will supply and replace the rods if this occurs.
It is crucial not to try to force a stuck or broken lock. This can cause the lock to snap or break, particularly with a window made of uPVC that expands and contracts as it warms and cools. To prevent this from happening issue, you should call a locksmith professional to diagnose the issue and fix it.
Sticky Doors/Window
It is annoying to have doors and windows that stick, but they may also indicate more serious structural problems. It's important to get professional assistance if you're having difficulties closing or opening a door or window. The issue could be the result of a variety of things such as foundation settlement and weak crawl space support.
Doors and windows often are stuck due to humidity or an issue with the frame itself. When exposed to moisture, wood frames may begin to warp. This makes opening and closing them a challenge even if the hardware in good condition. In this case, the wood swells and pushes against the hinges, causing friction.
If your door or window is sagging in summer and you are unable to get it to close, try using bar soap to decrease the friction. It will shrink and may temporarily solve the issue. This procedure will have to be repeated periodically during periods of high humidity.
A more permanent solution is making the door or window frame down to an even finish. This can be done by hand or with the power tool. A professional can also stain and sand or paint your window or door frame to make it appear new again.
If Sanding and soap aren't working it's likely the issue is due to foundation settlement or a damaged crawl space. Examine for cracks in your area. It's time to call a foundation specialist if you see any of these indications. Foundation damage can lead to uneven floors and misaligned interior walls, which in turn causes sticking doors and windows. It's important to tackle these issues as early as you can to avoid costly and risky repairs in the future. If left unattended the issues could get worse to the point that your entire home is structurally unstable. Call the Southeast's top experts in foundation repair to schedule an inspection now!
Cracking/Blowing Issues
Cracks can develop when double glazing begins to degrade. This can be unsightly and it also allows all the heat that has been stored in your home to escape. It also poses an hazard for your family members, as the glass's sharp edges can cause injury in the event that they break. It is better to fix double-glazing windows that have a crack prior to them get worse. This can increase the cost of replacement.
Window seals are vital for keeping air in between the window panes and also to stop drafts from entering your home. Over time, the seals can shrink or get damaged because of changes in weather. Unchecked, it can result in condensation, moisture, and draughts in your home.
A professional can usually solve this problem. They can repair the window seal in order to restore your windows back to their original condition. They may also suggest additional features that can reduce the possibility of a stress crack forming in the future, for example trickle vents to improve ventilation.
It is also possible to try lubricating the hinges and handles on your windows and doors. This will enable them to move more easily and allow the lock to function as it was intended. Put some lubricating oils on a clean cloth and rub it into the handles and hinges, as well as the areas that they pass through the frame (for example, for sash windows). You can also remove the handles and clean them with warm soapy water to get rid of any dirt or dust.
If your uPVC doors and windows aren't working in the way they should, it's crucial to contact a professional to fix them. They will be able to identify the problem quickly and then resolve it within a short amount of time. It's a lot safer and more affordable than attempting to fix it yourself and could cause damage to the mechanism. It also gives you peace of mind knowing that your home is secure and safe.